SAVE €30 Code: may30 (over €400) +Free 48HR Delivery (€400+)

Springfree Trampoline Assembly: Step-by-Step Guide

Assembling a Springfree trampoline can be a bit of a complex process, but with careful planning and attention to detail, it can be done efficiently and safely.


Here's a step-by-step guide to help you assemble your Springfree trampoline:

Before you start:

  • Ensure you have all the necessary tools and components. The assembly instructions should list everything you need.
  • It's recommended to have at least two adults for assembly, as some parts may be heavy or require holding in place while attaching other components.
  • Choose a flat, level area in your yard for assembly, free from obstacles or overhanging branches.

Step 1: Unboxing and Preparation

  1. Lay out all the trampoline components on a flat surface, and make sure you have the user manual and assembly instructions nearby.
  2. Check that you have all the necessary parts and hardware as listed in the instructions.

Step 2: Install Frame Components

  1. Begin by assembling the frame. Lay out the vertical frame sections (posts) and horizontal frame sections (rails).
  2. Follow the instructions to connect the frame sections using the provided hardware. Use the appropriate wrenches or tools to tighten the bolts securely.

Step 3: Attach the Mat Rods

  1. Locate the mat rods, which are flexible fiberglass rods with attached springs.
  2. Attach the mat rods to the hooks on the frame. Make sure they are securely in place.

Step 4: Assemble the Mat

  1. Carefully unroll the trampoline mat onto the frame. Ensure it's positioned correctly with the mat rods aligned with the frame's hooks.
  2. Attach the mat rods to the mat's V-rings. Make sure each rod is securely connected.

Step 5: Install the Safety Enclosure

  1. Assemble the safety enclosure poles according to the instructions. These poles will be placed around the perimeter of the trampoline.
  2. Attach the netting to the poles, following the provided instructions. Make sure the netting is taut and securely fastened.
  3. Install the net posts onto the designated brackets on the frame.

Step 6: Secure the FlexiNet and FlexiRod System

  1. Ensure that the FlexiNet is properly attached to the trampoline frame and that all connections are secure.
  2. Install the FlexiRods by sliding them into the FlexiNet. Make sure they are correctly positioned to maintain the tension in the netting.

Step 7: Final Safety Checks

  1. Inspect all connections, bolts, and hardware to ensure they are tight and secure.
  2. Check that the trampoline is on a level surface and that there are no obstructions around or above it.
  3. Test the trampoline's bounce and ensure that it feels stable.

Step 8: Read the Safety Guidelines

  1. Familiarize yourself and your family with the safety guidelines provided in the user manual.
  2. Explain these guidelines to anyone who will be using the trampoline.

Congratulations! Your Springfree trampoline is now assembled and ready for use. Remember to regularly inspect and maintain your trampoline to ensure it remains safe and enjoyable for everyone. Always follow the manufacturer's guidelines and safety recommendations for use.